Steel Round Bars_Products

Ferro Silicon
An iron alloy composed of iron, iron, and silicon (using silica, steel, and coke as raw materials, and silicon reduced at a high temperature of 1500 to 1800 degrees Celsius is melted into molten iron to form a ferrosilicon alloy). It is an important alloy
Anyang Jiashike Alloy Company [Verified]

Negotiable
Inquiry

General Calcium Grease
This kind of grease with overbased calcium sulfonate complex thickening refined base oil, and adding the antioxidant, structure improvement
Shandong Shengte Commercial Limited [Verified]

Negotiable
Inquiry

Zirconia Ceramic Pistons and Plungers
Zirconia is a very advanced industrial ceramic materials, it offers high strength, wear resistance, and flexibility far beyond those of most other technical ceramics.
Shanghai Fine-boon Science & Technology Co.,ltd. [Verified]

Negotiable
Inquiry

Neodymium Ring Magnets
The magnetized direction is always through axial, but some customers use it to assemble their sensor, then the magnetized direction is through the diametral.
Ningbo Enuo Magnet Co.,Ltd [Verified]

Negotiable
Inquiry

Tungsten Carbide Wheel Cutters
Tungsten Carbide Wheel Cutters Our standard Tungsten Carbide Wheel Cutters have been well known and utilized throughout thin, flat glass cutting industries, tile cutting, used for all-purpose, ordinary cutting, etc. The cutting process is clean...
S & T Carbide Industrial Co., Ltd [Verified]

Negotiable
Inquiry

4340 Round Steel Bars
4340 Round Steel Bars, Steel Grade: Alloy Steel 40CrNiMo/1.6563, Specification: Diameter (mm) Length (mm) Round bars: 12~3000 4000~6000 Hot rolled 280~1000 3000~5800 Forged Thickness(mm) Width(mm) Lengt...
Shenzhen Guangshenfa Metal Co., Ltd [Verified]

Negotiable
Inquiry

China plastic mould steel(P20/1.2311/3Cr2Mo)
P20, American AISI standard pre-hardened plastic mold steel, good machining performance, excellent polishing performance, a certain toughness, can be carburized, surface hardness is up to 65HRC after carburizing quenching, with higher hot hardness an...
Ezhou Jinsha Special Steel CO., Ltd. [Verified]

Negotiable
Inquiry

Mild Steel Bright Bar
Mild steel bright bar is manufactured by the production process of cold drawn, heat treatment, peeling, straightening, grinding and polished. It is produced on the basis of black steel. It has closer dimension - better straightness and flatness. Yet ...
Shenzhou Hongxing Bright Steel Co., Ltd. [Verified]

Negotiable
Inquiry

p20 1.2330 3Cr2Mo m202 618 plastic mould steel
Equivalent grades GB DIN AISI JIS 3Cr2Mo 1.2330 P20 Chemical Composition C Si Mn Cr P S Mo 0.37-0.44 0.17-0.37 1.40-1.80 ≤0.030 0.035MAX 0.035MAX ≤0.15 Available size Round Bar Diameter Length 10-380mm 2000-5800mm Flat Bar Thickness Width Len...
Hubei Joy Imp&Exp Co.,Ltd [Verified]

Negotiable
Inquiry

China tool steel&die steel(D3/1.2080/Cr12/SKD1)
1.2080 Cold Work Mould Steel of Features: High hardenability, high hardness, high wear resistance, small deformation after quenching, good toughness Supply Condition and Hardness: Annealed, hardness â‰¤ 255HBS; Spheroidization annealed, hardn...
Ezhou Jinsha Special Steel CO., Ltd. [Verified]

Negotiable
Inquiry

H13 1.2344 skd61 hot work mould steel
Equivalent grades GB DIN AISI JIS 4Cr5MoSiV1 1.2344/ H13 SKD61 X40CrMoV5 Chemical composition C Si Mn Cr P S Mo V 0.30-0.40 0.80-1.20 0.20-0.40 4.75-5.50 0.03MAX 0.03MAX 1.25-1.75 0.80-1.20 Available size Round Bar Diameter Length 10-380mm 2000...
Hubei Joy Imp&Exp Co.,Ltd [Verified]

Negotiable
Inquiry

Negotiable
Inquiry

China hot work tool steel(H11/1.2343/SKD6)
Quenching and Tempering specification: Preheat temperature 790Â° C, Quenching Temperature 1000Â° C(Salt bath) or 1010Â° C(Controlled atmosphere), heat preservation 5~15min, then air cooling; Tempering temperature 550Â° C, hardnessâ‰¥ 60HRC. Gas n...
Ezhou Jinsha Special Steel CO., Ltd. [Verified]

Negotiable
Inquiry

Round Bar Steel P20 plastic mold steel
Dongguan songshun mould steel CO.,LTD. as China's largest steel wholesaler, Main Steel has: 4140 steel,D2 steel,4130 steel,H13 steel,P20 steel,AISI 4340 steel,1.2738 steel,1.2379 steel,1.2344 steel,1.2080 steel etc.. You can learn more about o...
Dongguan songshun mould steel CO.,LTD. [Verified]

Negotiable
Inquiry

DIN 1.2312/AISI P20+S mold steel round bars flat bars
P20+S/ 1.2312 / 40CrMnMoS86 (plastic mold steel) Size Available: Plate: Thickness: 40-350mm Width: 100m-1000mm Length: 2m—6m Round: Dia. 60---800mm Detailed Description Characteristics: Round P20+S is with addition...
Hubei Rising Technology Co., Ltd [Verified]

Negotiable
Inquiry

Wholesale aisi 4140 steel round bar
Dongguan songshun mould steel CO.,LTD. as China's largest steel wholesaler, Main Steel has: 4140 steel,D2 steel,4130 steel,H13 steel,P20 steel,AISI 4340 steel,1.2738 steel,1.2379 steel,1.2344 steel,1.2080 steel etc.. You can learn more about ou...
Dongguan songshun mould steel CO.,LTD. [Verified]

Negotiable
Inquiry

Negotiable
Inquiry

Negotiable
Inquiry

C45 Carbon Steel Bars in Black Surface
Carbon Steel GB ASTM DIN JIS 20 1020 C20/C22 S20C 35 1035 C35 S35C 45 1045 C45 S45C 60 1060 C60
Shenzhen Guangshenfa Metal Co., Ltd [Verified]

Negotiable
Inquiry

China tool steel&die steel(D3/1.2080/Cr12/SKD1)
1.2080 Cold Work Mould Steel of Features: High hardenability, high hardness, high wear resistance, small deformation after quenching, good toughness Supply Condition and Hardness: Annealed, hardness â‰¤ 255HBS; Spheroidization annealed, hardn...
Ezhou Jinsha Special Steel CO., Ltd. [Verified]

Negotiable
Inquiry

All Categories